One gallon of glue later.

All the legs are a go. Squaring the end of the top.

Leg three.

I did not get the most completed this weekend as I needed to on the workbench. This is leg three in the clamps.

Leg one.

One leg is out of the clamps.

I hate to disappoint.

More glue ups! This is one of the legs coming in at 7 ½ in sq.

Not exciting photography.

For the rest of the week I will be making the legs for the bench. This is not what makes for good photos. So I will have to work the canon 570, G7, G9 or S95 the best I can.

Photos of My latest cabinet.

Ebany staned pine with gray pine panel.

Good old #8

Flatting the under side for the legs. This is where the #8 shines.

Thursday

The last glue up for the top!

The big glue up.

The big glue up. This was the biggest glue up and the most critical. The top is heavy and moving it is not easy. Just one more glue up and the top is complete.

tail vice assembly.

Today I glued up the tail vice assembly. I Took some shots before it is fixed forever in wood and glue. Well I have made it able to be disassembled if need be.

Workbench

Tail vise completed. Glue up the assembly on Tuesday. I hope to have the top all glued up by Friday. Top is at 16” at this time.

Saturday

The top is growing and getting heaver with each glue up. The top could be as much as 350 lbs completed.

Total bench weight could hit 450 lbs or more.

The tail vise is progressing.

Friday

Tail vice and the top keeps growing.

More of the same.

More gluing. I did get more completed on the tail vise.

Tail vise.

Besides the top glue ups I started to work on the tail vise.

Glue, lots of it!

It will be all about glue this week as the top of the Roubo bench is built!

The start of the Roubo Workbench.

Work has started on the top. It may not look like much but it is a start.